User’s Manual
31
Enable SNMP
Figure 3-22
Table 3-16 Description of SNMP parameters
Parameter
Description
Location
Set the location identification of the device.
Contact
The contact information and name of SNMP.
Name
RO Community
SNMP RO community name, the default is public, Only with read
permission.
RW Community
SNMP RW community name, the default is private, with read and write
permissions.
Click
Save
to save the configuration.
Step 4
Click
Apply Settings
to apply the configuration.
Step 5
(Optional) Click
Cancel Changes
to cancel the configuration.
Step 6
3.5.4 System Log
You can enable system log to capture system messages. By default the system log will be
collected in the local file /var/log/messages.
Log in to the web interface of the Router.
Step 1
In the left navigation menu, click
Services
.
Step 2
In
SNMP
section, enable
Syslogd
, and then select
Syslog Out Mode
.
Step 3
The following system output modes are available:
Console: Outputs the log information to console port.
Web: Outputs the log information to Web.
Net
is not supported currently.
Click
Save
to save the configuration.
Step 4
Click
Apply Settings
to apply the configuration.
Step 5
(Optional) Click
Cancel Changes
to cancel the configuration.
Step 6
Summary of Contents for DH-WM4700-O
Page 88: ...User s Manual...
