Dahua D-XVR8208A-4K-I User Manual Download

Page: 20 / 315

The Grand Tour

Figure 3-3

No.

Name

Function

Power button

Press this button to boot up or shut down the device.

Address

Press this button to input device serial number, so that you can

control the Device.

Forward

Multi-step forward speed and normal speed playback.

Slow motion

Multi-step slow motion speed or normal playback.

Next record

In playback state, press this button to play back the next video.

Previous record

In playback state, press this button to play back the previous

video.

Play/Pause

In normal playback state, press this button to pause playback.



In pause state, press this button to resume to normal



playback.

In live view window interface, press this button to enter video



search menu.

Reverse/pause

In the reverse playback state, press this button to pause reverse

playback.

In the reverse playback pause state, press this button to resume to

playback reversing state.

Esc.

Go back to previous menu or cancel current operation (close front

interface or control).

Record

Start or stop record manually.



In record interface, use the direction buttons to select the



channel that you want to record.

Press this button for at least 1.5 seconds, and the manual



record interface will be displayed.

Summary of Contents for D-XVR8208A-4K-I




























































































































































































































































































































Search results

Summary of Contents for D-XVR8208A-4K-I

Reviews:

Related manuals for D-XVR8208A-4K-I

Brands by name

Popular brands

Dahua D-XVR8208A-4K-I, User Manual

Search results

Summary of Contents for D-XVR8208A-4K-I

Reviews:

Related manuals for D-XVR8208A-4K-I

Brands by name

Popular brands