Dahua D-XVR8208A-4K-I User Manual Download

Page: 141 / 315

Local Configurations

130

Figure 5-119

Select the upgrade audio file (.bin).

Step 3

Click

to return to the Siren interface.

Step 4

Click

Start Upgrade

to upgrade the alarm audio file of the camera.

Step 5

5.10.4 Video Detection

Video detection adopts computer vision and image processing technology. The technology

analyzes the video images to detect the obvious changes such as moving objects and

blurriness. The system activates alarms when such changes are detected.

5.10.4.1 Configuring Motion Detect Settings

When the moving object appears and moves fast enough to reach the preset sensitivity value,

the system activates the alarm.

Select

Main Menu > ALARM > VIDIEO DETECT > Motion Detect

Step 1

The

Motion Detect

interface is displayed. See Figure 5-120.

Summary of Contents for D-XVR8208A-4K-I




























































































































































































































































































































Search results

Summary of Contents for D-XVR8208A-4K-I

Reviews:

Related manuals for D-XVR8208A-4K-I

Brands by name

Popular brands

Dahua D-XVR8208A-4K-I, User Manual

Search results

Summary of Contents for D-XVR8208A-4K-I

Reviews:

Related manuals for D-XVR8208A-4K-I

Brands by name

Popular brands