Local Configurations
146
Parameter
Description
Show Message
Select the
Show Message
check box to enable a pop-up alarm
message in your local host PC.
Alarm Upload
Select the
Alarm Upload
check box to enable the system to
upload the alarm signal to the network (including alarm center)
when an alarm event occurs.
Not all models support this function.
The corresponding parameters in the alarm center should be
configured. For details, see "5.15.1.12 Configuring Alarm
Send Email
Select the
Send Email
check box to enable the system to send an
email notification when an alarm event occurs.
To use this function, make sure the email function is enabled in
Main Menu > NETWORK > EMAIL
.
Record Channel
Select the channel(s) that you want to record. The selected
channel(s) starts recording after an alarm event occurs.
The recording for intelligence event and auto recording function
must be enabled. For details, see "5.1.4.9 Configuring Recorded
Video Storage Schedule" and "5.9.1 Enabling Record Control."
PTZ
Click
Setting
to display the PTZ interface.
Enable PTZ linkage actions, such as selecting the preset that you
want to be called when an alarm event occurs.
To use this function, the PTZ operations must be configured. For
details, see "5.4 Controlling PTZ Cameras."
Post Record
Set a length of time for the Device to delay turning off recording
after the alarm is cancelled. The value ranges from 10 seconds to
300 seconds.
Tour
Select the
Tour
check box to enable a tour of the selected
channels.
To use this function, the tour setting must be configured. For
details, see "5.2.8 Configuring Tour Settings."
After the tour is ended, the live view screen returns to the view
layout before tour started.
Snapshot
Select the
Snapshot
check box to take a snapshot of the selected
channel.
To use this function, make sure the snapshot function is enabled
for
Intel
in
Main Menu > STORAGE > SCHEDULE > Snapshot
.