Dahua 5216A-X User Manual Download

Page: 180 / 331

Local Configurations

167

Figure 5-134

Configure the parameters for the rule that you selected.

Step 4

Select the check box of the rule to enable it.

Step 5

Click

Apply

to complete the settings.

Step 6

5.11.1.1 Configuring Tripwire Rules

When the target object crosses the tripwire in the defined direction, the system activates

alarms.



The tripwire can be configured as a straight line or broken line.



Supports detecting one-way or two-way tripwire crossing.



Supports multiple tripwires in the same scenario to meet the complexity.



Supports size filtering for target.

On the rule line that you added, in the

Type

list, select

Tripwire

. See Figure 5-135.

Step 1

Summary of Contents for 5216A-X












































































































































































































































































































































Search results

Summary of Contents for 5216A-X

Reviews:

Related manuals for 5216A-X

Brands by name

Popular brands

Dahua 5216A-X, User Manual

Search results

Summary of Contents for 5216A-X

Reviews:

Related manuals for 5216A-X

Brands by name

Popular brands