Dahua 5216A-X User Manual Download

Page: 128 / 331

Local Configurations

115

Figure 5-82

Enable the

Batch Modify

function.

Step 3

Configure the settings for start IP address (the IP address is allocated in sequence),

Step 4

subnet mask, default gateway, user name, and password.

Enable the

Add

function to add the devices into the

Added Device

area.

Step 5

Click

Apply

to save the settings.

Step 6

5.6.1.6 Exporting IP Address

You can export the added IP address to the USB storage device.

The exported information is saved in .csv file, which includes IP address, port number, channel

number, manufacturer, user name, and password.

Insert the USB storage device to the USB port of the Device.

Step 1

Click

Export.

Step 2

The

Browse

interface is displayed. See

Figure 5-83.

Summary of Contents for 5216A-X












































































































































































































































































































































Search results

Summary of Contents for 5216A-X

Reviews:

Related manuals for 5216A-X

Brands by name

Popular brands

Dahua 5216A-X, User Manual

Search results

Summary of Contents for 5216A-X

Reviews:

Related manuals for 5216A-X

Brands by name

Popular brands