Dahua 5216A-X User Manual Download

Page: 92 / 331

Local Configurations

Figure 5-43

Configure the settings for the zero-channel parameters. See Table 5-17.

Step 2

Parameter

Description

Enable

Enable zero-channel function.

Compression

In the

Compression

list, select the video compression standard

according to the device capability. The default is H.265.

Resolution

In the

Resolution

list, select the video resolution. The default is

704×576 (D1).

Frame Rate

(FPS)

Select a value between 1 and 25 for PAL standard, and between 1

and 30 for NTSC standard. The actual arrange is decided and

selected dependent on the Device capability.

Bit Rate (Kb/S)

The default value is 1024Kb/S. The actual arrange is decided and

selected dependent on the Device capability and frame rate.

Table 5-17

Click

Apply

to save the settings.

Step 3

In the live interface on the web, click

to select one of the

multi-channel modes, and then you can view the local video image.

5.2.6.4 Configuring TV

Not all models support this function.

Summary of Contents for 5216A-X












































































































































































































































































































































Search results

Summary of Contents for 5216A-X

Reviews:

Related manuals for 5216A-X

Brands by name

Popular brands

Dahua 5216A-X, User Manual

Search results

Summary of Contents for 5216A-X

Reviews:

Related manuals for 5216A-X

Brands by name

Popular brands