Dahua 5216A-X, User Manual

Page: 231 / 331

Local Configurations 218
Figure 5-188
Configure the settings for the connection parameters. See Table 5-57. Step 2
The connection parameters except Max Connection cannot take effects until the
Device has been restarted.
Parameter Description
Max Connection
The allowable maximum clients accessing the Device at the same
time, such as WEB, Platform, and Mobile Phone.
Select a value between 1 and 128. The default value setting is 128.
TCP Port
The default value setting is 37777. You can enter the value
according to your actual situation.
UDP Port
The default value setting is 37778. You can enter the value
according to your actual situation.
HTTP Port
The default value setting is 80. You can enter the value according
to your actual situation.
If you enter other value, for example, 70, and then you should enter
70 after the IP address when logging in the Device by browser.
RTSP Port
The default value setting is 554. You can enter the value according
to your actual situation.
POS Port
Data transmission. The value range is from 1 through 65535. The
default value is 38800.
HTTPS Enable
Enable HTTPS .
HTTPS Port
HTTPS communication port. The default value setting is 443. You
can enter the value according to your actual situation.
Table 5-57