Dahua 5216A-X, User Manual

Page: 232 / 331

Local Configurations 219
Click Apply to complete the settings. Step 3
5.16.1.3 Configuring Wi-Fi Connection Settings
You can make wireless connection between the Device and the other devices in the same
network through Wi-Fi settings, facilitating the devices connection and mobility.
Only the Device with Wi-Fi module supports this function.
Select Main Menu > NETWORK > Wi-Fi . Step 1
The Wi-Fi interface is displayed. See Figure 5-189.
Figure 5-189
Configure the settings for the Wi-Fi connection parameters. See Table 5-58. Step 2
Parameter Description
Wi-Fi Auto Connect
Enable Wi-Fi Auto Connect .
After the Device is restarted, it will automatically connect to the
nearest hotspot that had been connected successfully.
Refresh
Refresh the hotspot list. The self-adaption function such as adding
password is supported if such setting was once configured.
Connect
In the hotpots list, select a hotspot, and then click Connect .
To reconnect the same hotspot, disconnect first and then 
reconnect.
To connect to other hotspot, disconnect from the current 
connected hotspot first, and then connect to the other hotspot.
Disconnect To disconnect from a hotspot, click Disconnect .
Table 5-58