Main Function Description
42
Parameter
Explanation
LineDebouncerTimeAbs
When IO line is selected to be the input, you can set the debouncer
time.
A pulse less than the set value will not be considered as a valid
trigger input.
5.5
AnalogControl
In this property, you can adjust the acquired analog signals, including gain , black balance, white
balance and gamma correction etc., as shown in Figure 5-5; please refer to Sheet 5-6 for detailed
parameter settings.
Figure 5-5 Analog Control
Sheet 5-6 Analog Control - Parameter Explanation
Parameter
Explanation
GainSelector
The channel gain is not supported to set, the default is All.
GainRaw
The larger the gain, the brighter the image. The set range is different for
different types and the default value is 1.
The analog gain is preferentially enabled.
BlackLevelSelector
BlackLevelSelector is used to select the black balance channel.
BlackLevel is used to eliminate the impact of Sensor’s dark current. The dark
current is a phenomenon that the image brightness is a value greater than 0
when it is all black. By modifying the black level value, the brightness of the
channel can be more responsive to the actual image brightness. The setting
range is 0 ~ 255.
When BlackLevelAuto is set as Off, the fixed black level that the
algorithm minus is 1/4 of the value set in BlackLevel.
When BlackLevelAuto is set as Once, it will automatically set
BlackLevel for once according to the return value of sensor. Then it will
BlackLevel
BlackLevelAuto
