Main Function Description
44
Figure 5-6 LUT Control
Sheet 5-7 LUT Control - Parameter Explanation
Parameter
Explanation
LUTSelector
Selects the channel of LUT.
Currently only Luminance
（
brightness
）
Look-Up Table is supported.
LUTEnable
LUT setting.
1.
Enables LUT for LUT lookup table function.
2.
Sets digital points of the lookup table in LUTIndex with range of
0~4095.
3.
When LUTIndex is selected, you can set corresponding values in
LUTValue.
LUTIndex
LUTValue
LUTValueAll
Sets all the values of Index to the same value.
5.7
TransportLayerControl
In this property, you can set parameters related to camera’s transport layer protocol, as shown in Figure
5-7; please refer to Sheet 5-8 for detailed parameter settings.
Figure 5-7 Transport Layer Control
Sheet 5-8 Transport Layer Control - Parameter Explanation
Parameter
Explanation
PayloadSize
The number of bytes transferred for each image or
chunk on the stream channel.
GevTimestampTickFrequency
Defines the tick frequency of the timestamp.
U3vCurrentSpeed
Current connection speed of the camera.
