User’s Manual
45
5.4.9
Event
An alarm will be triggered when an abnormal event occurs to the Device. The event types include:
Network Error
: Alarm will be triggered when there is
Off-line Event
(the Device is offline) or
IP
Conflict
.
Illegal Access
: Alarm will be triggered when unauthorized access is detected by the system.
Security Exception
: Alarm will be triggered when security problem occurs.
Select
Setup > Event > Abnormality
.
Step 1
The following figure takes
Network Error
as an example. For other events, click the
Illegal
Access
or
Security Exception
tab.
Network error event
Figure 5-27
Configure the parameters.
Step 2
Refer to the actual interface to view the parameters that you need to configure for each
abnormality.
Table 5-15
Parameters of abnormality events
Parameter
Description
Enable
Select it to enable alarm of abnormality event.
Event Type
Alarm will be triggered when there is
Off-line Event
(the Device is offline)
or
IP Conflict
.
Login Error
Configure the number of login error allowed. The range is 3–10 times. This
parameter is available when the
Illegal Access
tab is selected.
Click
Confirm
.
Step 3
5.4.10
Storage
You can configure the names and storage paths of snapshots and video recordings.
Select
Setup > Storage > Destination
.
Step 1
Name the snapshots in the
Input Name
section. You can click
Help…
to view the
Picture
Step 2
Naming Help
, or click
Restore
to restore the naming rule to the default.
After setting the naming rule, you can view the name example in the
Name Preview
section.
Click
Browse…
to set the save paths of snapshots and video recordings respectively.
Step 3
Click
Confirm
.
Step 4