User’s Manual
36
Parameter
Description
Protocol
Serial port protocol.
Transparency Serial
and
DHRS Device
are available.
Select
DHRS Device
when external indicator light is connected.
Data Bit
It is
8
by default.
Stop Bit
It is
1
by default.
Baud Rate
Select the corresponding baud rate. A high baud rate helps move data fast, but
needs a wide bandwidth.
Parity
It is
None
by default.
Click
Open
to enable the
Recv Region
(receiving region) and
Send Region
(sending
Step 5
region).
Enter communication data in the
Send Region
, and then click
Send
.
Step 6
The Device sends data to the serial port, and the data returned by the serial port will be
displayed in the
Recv Region
.
5.4.1.5
Intelligence Default
On the
Intelligence Default
interface, you can restore all settings of the
ITC
tab to factory settings.
Select
Setup > ITC > Intelligence Default
.
Step 1
Click
Default
.
Step 2
In the pop-up box, click
OK
.
Step 3
5.4.1.6
Relative Device
You can log in to the auxiliary device of the Device by selecting
Setup > ITC > Relative Device
, and
entering the
IP Address
,
Subnet Mask
, and
Default Gateway
of the auxiliary device.
This function is available on select models, and the actual interface shall prevail.
Relative device
Figure 5-17
5.4.2
Camera
You can configure the camera attributes, video and snapshot parameters, and more.
5.4.2.1
Camera Attributes
After connecting the Device to network and viewing the live video on its web interface, you can
adjust the image parameters of the Device when necessary to get clear images.