User’s Manual
9
4
Quick Configuration with ConfigTool
The Device is delivered with the same default IP address (192.168. 1.108 by default. IP address of the
auxiliary camera of the DHI-ITC314-PH3A-TF and DHI-ITC314-PH3A-TBF series is 192.168.1.107 by
default). Plan available IP network segments properly based on actual network conditions.
Initialization
4.1
The Device is delivered in an uninitialized status. You need to initialize it, and modify the default
password before it can be used.
To acquire the configuration tool, go to Dahua official website, and then select
Support > Download
Center > ToolBox
, follow the onscreen instructions to download and install the tool.
Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stay in the same network segment.
Plan useable network segment properly to connect the device to the network.
The following figures and interfaces are for reference only, and the actual product shall prevail.
Double-click "ConfigTool.exe" to open the tool.
Step 1
Click
.
Step 2
Modify IP
Figure 4-1
Click
Search setting
.
Step 3
Enter the start IP address and end IP address of the network segment in which you want to
Step 4
search devices, and then click
OK
.