User’s Manual
10
All the devices found in the network segment are listed.
Step 5
Select one or several devices with
Status
shows
Uninitialized
, and then click
Initialize
.
Step 6
Select the devices that need initialization, and then click
Initialize
.
Step 7
Password setting
Figure 4-2
Set and confirm the password of the devices, then enter a valid email address, and then click
Step 8
Next
.
Password can be modified or reset in
System Settings
.
Select the options according to your needs, and then click
OK
.
Step 9
The
Initialization
interface is displayed after initialization is completed. Click the
Step 10
success icon ( ) or the failure icon ( ) for the details.
Click
Finish
.
Step 11
The device status in the
Modify IP
interface turns to
Initialized
.
Step 12
Modifying IP Address
4.2
You can modify IP address of one or multiple devices in one time. This section is based on
modifying IP addresses in batches.
Modifying IP addresses in batches is available only when the corresponding devices have the
same login username and password.
Do "Step 1" to "Step 4" in "4.1 Initialization" to search for devices in your network segment.
Step 1
After clicking
Search setting
, enter the username and password, and make sure that that
they are the same as what you set during initialization, otherwise there will be "wrong
password" notice.
Select the devices which IP addresses need to be modified, and then click
Modify IP
.
Step 2