User’s Manual
31
Click
to add customized title. You can configure other OSD information and its position
Step 5
as needed.
The system supports up to 5 customized titles.
Step 6
Click
Confirm
.
Step 7
5.4.1.2.2
Snap OSD
Configure the OSD information and position of image, and then the OSD information will be overlaid
on the snapshots.
Select
Setup > ITC > OSD Config > Snap OSD
.
Step 1
Snap OSD
Figure 5-12
Drag your mouse to select any area in the image to add image title. Drag the box to the
Step 2
position that you want, or enter the value in X/Y boxes at the lower-right side.
The system supports up to 8 image titles. You can customize OSD options of each
image title.
Right-click an image title to delete it.
Select the
Black Edge Location
(location of OSD black strip) which includes
Above
,
Below
,
Step 3
and
None
.
Select the
BlackRegion Height
, which ranges from 8 pixels through 32 pixels.
Step 4
Configure the font size and font color of OSD information.
Step 5
You can configure the font color by clicking
Custom FontColor
at the lower side.
Step 6
Click
More
, and the box of configuring new line and separater is displayed.
Step 7
1)
Select the
New Line
check box as needed.
2)
Configure the OSD separater, which includes
Blank Space
,
Vertical Line
and
Customized
. By selecting
Customized
, you can enter other separater.
3)
Click
Yes
.