![background image](http://html1.mh-extra.com/html/dahua-technology/dhi-itc214-ph3a/dhi-itc214-ph3a_user-manual_3222869037.webp)
User’s Manual
32
New line and separater
Figure 5-13
Configure
OSD Option
.
Step 8
Click
Recommend Overlay
to configure general overlay OSD options with one click.
Table 5-7
Snap OSD parameters
Parameter
Description
Insert Front
Select an OSD option, and then click
Insert Front
or
Insert Back
before selecting
another OSD option, the new OSD option will be shown before after the original
OSD option.
Insert Back
Modify
Click
Modify
, and the status of OSD information (
New Line
excluded) will change
to
. Click
to modify the prefix, postfix, content and separater of
corresponding OSD option.
Delete
Click
Delete
, and the status of all selected OSD information will change to
.
Click
to delete the corresponding OSD option.
Clear
Delete all the OSD information.
Line Feed
Select one OSD information, and then click
Line Feed
. The option next to the
selected OSD information will be shown in a new line in the snapshots captured
by clicking
ANPR Receive
on
Live
interface.
Click
Confirm
.
Step 9
5.4.1.3
Indicator Light Control
Configure the corresponding indicator color for different statuses of parking spaces, and then the
corresponding light will turn on when the parking space status changes.
You can also configure the remote control parameters to control the parking space indicator lights of
another parking detector, or make the indicator lights detected by the Device controlled by another
parking detector.
This function is not available for auxiliary camera of DHI-ITC314-PH3A-TF and
DHI-ITC314-PH3A-TBF series devices.
Remote control of indicator light is not available for DHI-ITC314-PH3A-TF and
DHI-ITC314-PH3A-TBF series devices.
Select
Setup > ITC > Light Control
.
Step 1