User’s Manual
33
Light control
Figure 5-14
Configure the parameters.
Step 2
Table 5-8
Description of indicator light control parameters
Parameter
Description
Light Config
Controlled IP
When the parking space indicator status of parking detector A
needs to be remotely controlled by parking detector B, enter the
IP address of B in
Controlled IP
, and the indicator light status of A
will be controlled by B.
This configuration works after you setting the IP address of A by
clicking
Remote Control
from
Setup > ITC > Light Control
on
web interface of B. For details, see Step 3.
Light Sensitivity Config
Licensed Sensitivity
Set the sensitivity of the indicator responds when licensed
vehicle, unlicensed vehicle, no vehicle or parking over parking
line is detected. The smaller the value, the faster the indicator
responds.
Unlicensed Sensitivity
NoVehicle Sensitivity
OverLineLightingSensitivity
Light For Parking Spaces Status
Space Free
Set the indicator status when
Space Free
(parking space is
empty),
Space Full
(parking space is occupied) and
Space
Space Full