User’s Manual
19
5.1.4
Logout
Click
Logout
at the upper-right side of the web interface to log out.
You can enter the username and password to log in again.
5.1.5
Resetting Password
You can reset your password through email when it is lost or forgotten. Make sure that your email is
correctly entered during initialization (see "5.1.2 Initialization"). Email address of admin user can be
modified from
Setup > System > Account > Account > Username
.
Details of resetting the password are as follows:
Enter the IP address of the Device in the browser address bar, and press Enter.
Step 1
On the login interface, click
Forgot password?
Step 2
In the pop-up dialog box, click
OK
.
Step 3
Scan the QR code according to the interface prompt, and send the scanning result to the
Step 4
designated email to acquire security code.
Scan the actual QR code. Do not scan the QR code in this manual.
Enter received security code in the text box of
Security code
.
Step 5
Reset password
Figure 5-4
Click
Next
.
Step 6
Set
Password
, and enter your new password again in
Confirm Password
.
Step 7
The new password must consist of 8–32 characters, and contain at least two types
Step 8
from upper cases, lower cases, numbers and special characters (excluding ' " ; : and &). The
new password must be the same as the
Confirm Password
. Follow the password security
notice to set a high-security password.
Click
Yes
and the password is reset.
Step 9