0
LF
45/55
series
Safety instructions and warnings
SAFETY INSTRUCTIONS AND WARNINGS
1-5
1.3 WELDING
No welding of the chassis is
allowed without special, written
permission by DAF. Exceptions to
the above are the welding
operations described in the manual
“Superstructure directives”.
Non-compliance with welding
regulations may cause serious
damage to the chassis.
Failure to observe the following
instructions may damage the
electronic components.
General
-
Attach the earth clamp of the welding set as
close as possible to the area on the vehicle
where the welding is to be done and ensure
that it is well in contact with the part being
welded.
-
Never attach the earth clamp to vehicle
components such as the engine, axles,
springs, etc. Arcing on these components is
also not permitted. Non-compliance with the
above instructions may result in serious
damage to bearings, springs, etc.
-
The accessory or ignition position of the
ignition lock must not be switched on.
Remove the ignition key from the ignition
lock.
-
Protect plastic piping, rubber components,
plastic components, piston rods of hydraulic
cylinders and springs (in particular parabolic
springs) from welding splashes and
temperatures above 70
_
C.
2
ǹ
0201
Summary of Contents for LF45 Series
