DAF LF45 Series, Manual

Page: 64 / 74

0
PAINT TREATMENT
Paint treatment LF 45/55 series
1-6
1.4 RESPRAYING SEED TOP COATS
These instructions relate to parts in steel, SMC
(Sheet Moulding Compound) plastic or
glass-fibre reinforced polyester.
1. Remove any preserving agents, if
applicable; see “General Operations”.
2. Remove any rust with a rust-removal agent.
3. Clean the area to be resprayed with a
solvent.
4. Sand the area to be resprayed first with P80
sand paper and then with P180 sand paper.
5. Remove any dust from the sanded section
with a Tack-rag cloth.
6. Clean the area to be resprayed with a
solvent.
7. In the case of plastic, blow ionised air over
the area to be resprayed, or clean the area
with an anti-static liquid.
8. Apply the seed top coat according to the
manufacturer’s instructions.
9. Leave the paint to evaporate.
10. Observe the drying time as laid down in the
manufacturer’s instructions.
6
ǹ 0201