DAF LF45 Series, Manual

Page: 62 / 74

0
PAINT TREATMENT
Paint treatment LF 45/55 series
1-4
Paint repairing of cab top coat and SMC
polyester parts
1. Remove any preserving agents, if
applicable; see “General Operations”.
2. Remove any rust with a rust-removal agent.
3. Clean the area to be repaired with a
solvent.
4. Sand the area to be repaired first with P80
sand paper and then with P180 sand paper.
5. Remove any dust from the sanded section
with a Tack-rag cloth.
6. Fill the area to be repaired.
7. Sand the filled area with P180 sand paper.
8. Fine-sand/roughen the area to be sprayed
with 3M Scotch Brite ultra fine or an
equivalent product.
9. Remove any dust from the sanded section
with a Tack-rag cloth.
10. Clean the area to be sprayed with a solvent.
11. Apply a primer.
12. Leave the primer to evaporate/dry.
13. Apply a filler.
14. Leave the filler to evaporate/dry.
15. If necessary, fine-sand with 3M Scotch Brite
ultra fine or an equivalent product.
Following fine-sanding, remove any dust
with a Tack-rag cloth and clean the area
with a solvent.
16. Apply the top coat according to the
manufacturer’s instructions.
17. Leave the top coat to evaporate/dry.
Observe the drying time as laid down in the
manufacturer’s instructions.
6
ǹ 0201