DAF LF45 Series, Manual

Page: 24 / 74

0
SAFETY INSTRUCTIONS AND WARNINGS
Safety instructions and warnings
LF
45/55 series
1-6
Welding on the chassis
- When welding on the chassis, disconnect
the connectors of all electronic equipment
(including sensors and actuators), if they
are within a 1-metre radius from the point
being welded or within a 1-metre radius
from the earthing point.
- Disconnect the battery terminals if these
are within a within a 1-metre radius from the
point being welded or the earth clamp.
- If the battery terminals have to be
disconnected, all electronic units mounted
on the chassis must be disconnected as
well. Also disconnect the cab feed-through
connectors and disconnect the power
supply and earth cables that are connected
to the cab.
Welding on the cab
- When welding on the cab, disconnect the
battery terminals.
- Also disconnect the cab feed-through
connectors and disconnect the power
supply and earth cables that are connected
to the cab.
- Disconnect the connectors of all electronic
equipment (including sensors and
actuators), if they are within a 0.5-metre
radius from the point being welded or within
a 0.5-metre radius from the earth terminal.
Welding on the superstructure
- Follow the instructions for “Welding on the
chassis”, together with any specific welding
instructions for welding on the
superstructure.
Note:
During grinding, protect plastic piping, rubber
components, plastic components, piston rods of
hydraulic cylinders and springs (in particular
parabolic springs) in order to prevent damage
caused by grinding sparks.
2
ǹ
0201