Daewoo Cielo, Owner'S Manual

Page: 69 / 126

6ñ9
Auto travel preset button (16)
The unit will sean selected band and memorize the strongest 6
stations in sequent from the strongest one.(6FM1, 6FM2, 6MW, 6
LW)
ï If all stations are weak, none may be memorized. If this
should occur, "0000" will appear on the display and the
warning tone will be heard. Then the unit will receive the
last station which was received before.
ï If there are fewer than 6 receivable stations, the unit will
memorize all the receivable stations. And the first memo-
rized station will be heard.
ï This unit has RDS functions. So, it does not memorize
the RDS stations of the same PI code.(In FM mode)
NOTE
1) Select the desired band.
2) Press this button for more than 1.5
seconds.
Then the indicator "AUT" and ap-
pears on the display.
Scanning will stop automatically and
the first memorized station will be
heard.
Press this button for less than 1.5
seconds. Each time button is pressed,
the station will shift one after another in
the order they were memorized.
1) Press this button for less than 1.5
seconds to select AUT mode.
2) Press the band selector button (8)
for more than 1.5 seconds to re-
ceive, in sequence, all the stations
stored in the memory for 5 seconds
each. To stop scanning and listen to
the current receiving station, press
it again.
Presetting
stations
Recalling the
AUT
Preset stations
Scanning the
AUT
Preset stations
Desired operation
Procedure
1. TP indicator
2. TP function indicator
3. AUT indicator
4. PTY indicator
5. Band indicator
6. Preset number indicator 7. Frequency or station name
indicator, PTY display
8. AF indicator
9. Mono indicator
10. Stereo indicator
3 4 2
7
L. C. D
8
1 9 10
6 5
Untitled-46 10/31/2006, 12:54 PM 9