background image

6ñ17

The antenna will automatically extend when
the radio mode is switched on, and
retract when the radio mode is switched
off, or cassette mode is switched on.

POWER ANTENNA

*

Before switching the radio on or off

make sure that there is no one near

the antenna while it is retracted or

extened.

CAUTION

OPERATING TIPS FOR

AUDIO SYSTEM

When the ignition switch is placed in the I
position, the audio system can be switched
on  by pushing the power button.
If the ignition switch is turned to B position
while the audio system is operating and the
key is not removed from the ignition switch,
the audio system will continue to function.
When the key is removed,  the audio
system is switched off automatically.

1. We recommend that tapes below C-

90(the playing time: 90 minutes) be
used. C-120 tape is extremely thin and
its use should be avoided if at all pos-
sible.

2. If a loop of tape has formed, it must be

taken up by turning one of the spools
with a suitable object such as ballpen
or pencil.

3. Store cassettes where they will not be

exposed to high temperature, direct
sunlight, magnetic fields, tape abrasion
or dirt.

CARE AND MAINTENANCE

4. Never leave cassette inserted in the

operating position with the tape player
inoperative.

5. Clean the head of the tape player

carefully with a cotton applicator
soaked in alcohol. If the tape player
is used for more than one hour every
day, the head should be cleaned once
or twice a month.
If it is used very infrequently, you only
need to clean the head every two or
three months.

6. Don't oil revolving parts of the tape

player.

7. Keep tapes in their plastic cases when

not in use.

Untitled-46

10/31/2006, 12:54 PM

17

Summary of Contents for Cielo































































































































Reviews: