Daewoo Cielo Owner'S Manual Download Page 70

Page: 70 / 126

6ñ10

1) Sel

the
rize

2) Pre

1.5
diti
pro

Sel
the

Presetting
stations

Recalling the
preset stations

Desired operation

4. Stereo/mono button (5

If FM stereo broadcasting is
seconds or more to get the in
To return to stereo mode, pr
The indicator "MO" will dis
received, the indicator " "

5. Preset buttons (17)

6 stations can be preset on ea

TAPE OPERATION

1. Cassette tape slot door (7)

Insert a cassette into this slot door with the exposed tape facing

to the right. Then tape play will begin.

2. Tape mode select button (9)

If a cassette is already inserted, press this button to play the tape.

3. Fast forward

Press the FAST FORWARD button (14) to rapidly advance the

tape. Press the REWIND button to release the fast forward

button.

4. Rewind

Press the REWIND button (13) to rapidly rewind the tape.

Press the FAST FORWARD button to release to rewind button.

5. Program buttons (13+14)

Press the FAST FORWARD and REWIND buttons

simultaneously to reverse the cassette direction and to play either

side of the type. The direction when the tape is traveling is

indicated by the arrows on the display. The right side arrow

indicates normal tape direction.

6. Tape eject

Press the EJECT button (6) completely to remove the cassette.

Then the mode changes to the preceding one.

RADIO OPERATION

1. Radio mode select button (8)

Press this button to turn on the radio.

2. Band select button (8)

Press this button to select the desired band.

Always remove the cassette tape before releasing the
detachable front panel.

NOTE

3. Tuning up or down buttons (4)

Pressing one of the buttons, tune in a frequency.

Band shift

Pressing time

FM1 < > FM2

Less than 1.5 seconds

FM1, 2 > MW

1.5 seconds or more

MW > FM1, 2

Less than 1.5 seconds

MW > LW

1.5 seconds or more

Auto(seek) tuning ñ The unit will seek in the direction of the
button pressed, and stop on the first strong station.

To tune up

Press "tuning up
button( )" for less
than 0.7 seconds.

Press "tuning up
button( )" for 0.7
seconds or more

To tune down

Press "tuning down
button( )" for less
than 0.7 seconds.

Press "tuning down
button( )" for 0.7
seconds or more

Auto(seek)
tuning

Manual tuning

Untitled-46

10/31/2006, 12:54 PM

Summary of Contents for Cielo































































































































Search results

Summary of Contents for Cielo

Reviews:

Related manuals for Cielo

Brands by name

Popular brands

Daewoo Cielo, Owner'S Manual

Search results

Summary of Contents for Cielo

Reviews:

Related manuals for Cielo

Brands by name

Popular brands