Daedong KIOTI EX35 Manual Download

Page: 29 / 238

safetY precautions

eX35(c)/eX40(c)/eX45(c)/eX50(c)

safetY precautions

eX35(c)/eX40(c)/eX45(c)/eX50(c)

3. the loader can be turned over if a

drawbar is improperly loaded.

make sure to use a drawbar prop-

er for the 3-point hitch lower link.

otherwise, it may lead to an injury

or even death.

4. never carry a big object with the

loader unless a proper implement

is attached. keep a carried ob-

ject low during driving. otherwise,

it may lead to an injury or even

death.

H11O104a

H11O105a

5. When attaching or detaching the

loader, fix all parts which are con

nected to the bucket and boom.

the bucket or boom can be acci-

dentally dropped down, leading to

an injury or even death.

H11O106a

M47-EU-01.indd 17

2012-03-14 오후 7:12:38

Summary of Contents for KIOTI EX35















































































































































































































































Search results

Summary of Contents for KIOTI EX35

Reviews:

Related manuals for KIOTI EX35

Brands by name

Popular brands

Daedong KIOTI EX35, Manual

Search results

Summary of Contents for KIOTI EX35

Reviews:

Related manuals for KIOTI EX35

Brands by name

Popular brands