Daedong KIOTI EX35 Manual Download

Page: 2 / 238

This manual was compiled in compliance with the ISO 3600, standards and the instructions contained here comply with

the requirements of the Machinery Directive 2010/52/EU in force in the European Community. For tractors sold or used

outside the European Community, local laws will prevail.
Main protections on the tractors discussed in this manual.

ISO 3600 EU StandardS

dESCrIPtIOn

nOn CaBIn

CaBIn

1. ROPS (Protection against overturning)

Yes

2. FOPS (Protection against objects falling from above)

Yes

3. OPS (Protection against penetration of objects from sides)

protection against hazardous chemicals

(Category

Ⅰ)

(Category

Ⅰ)

M47-EU-00.indd 2

2012-03-14 오후 7:11:31

Summary of Contents for KIOTI EX35















































































































































































































































Search results

Summary of Contents for KIOTI EX35

Reviews:

Related manuals for KIOTI EX35

Brands by name

Popular brands

Daedong KIOTI EX35, Manual

Search results

Summary of Contents for KIOTI EX35

Reviews:

Related manuals for KIOTI EX35

Brands by name

Popular brands