Daedong KIOTI EX35 Manual Download

Page: 18 / 238

safetY precautions

eX35(c)/eX40(c)/eX45(c)/eX50(c)

safetY precautions

eX35(c)/eX40(c)/eX45(c)/eX50(c)

3. do not operate your tractor in

an enclosed building without the

proper ventilation. containing car-

bon monoxide can cause serious

injury or death.

T66O110a

4. make sure that all pressure lines

are tight before starting the tractor.

5. pull only from the drawbar. nev-

er hitch anything to the axle hous

ing or any other point except the

drawbar. pulling from any other lo-

cation only increase the risk of se-

rious personal injury or death.

(1) drawbar

(2) towing hook

H11O110a

6. improper use of the draw-bar, even

if correctly positioned, can cause a

rear overturn.

7. do not overload an attachment

or towed equipment. use proper

counterweights to maintain tractor

stability. hitch heavy loads to the

draw-bar only.

M55O117a

M47-EU-01.indd 6

2012-03-14 오후 7:12:24

Summary of Contents for KIOTI EX35















































































































































































































































Search results

Summary of Contents for KIOTI EX35

Reviews:

Related manuals for KIOTI EX35

Brands by name

Popular brands

Daedong KIOTI EX35, Manual

Search results

Summary of Contents for KIOTI EX35

Reviews:

Related manuals for KIOTI EX35

Brands by name

Popular brands