Daedong KIOTI EX35 Manual Download

Page: 102 / 238

description oF operating systeM

ex35(c)/ex40(c)/ex45(c)/ex50(c)

description oF operating systeM

ex35(c)/ex40(c)/ex45(c)/ex50(c)

REAR wINDOw

(1) Handle Of Rear Window

(2) Button

Press the button on the rear window

handle lightly to open the rear win

dow in the cabin.
To close it, hold the handle and pull it

gently.



The rear window may not be

opened due to an implement.

Make sure to check if there is

enough space to open the win-

dow to prevent damage and

breakage by an implement.



Never drive the tractor with the

door open. An accident can

occur.

H11O482A

wARNING

uNlOCKING ThE DOOR

Pull the lever to open the door in the

cabin.

H11O4F1A

M47-EU-04.indd 46

2012-04-06 오후 3:31:29

Summary of Contents for KIOTI EX35















































































































































































































































Search results

Summary of Contents for KIOTI EX35

Reviews:

Related manuals for KIOTI EX35

Brands by name

Popular brands

Daedong KIOTI EX35, Manual

Search results

Summary of Contents for KIOTI EX35

Reviews:

Related manuals for KIOTI EX35

Brands by name

Popular brands