Daedong KIOTI DK35SE, Manual

Page: 153 / 221

6
-14
DK35SE/DK40(C)SE/DK45(C)SE
4. Regen.
The Regen. function is activated
when the joystick lever is pushed
one position further to the right from
the dump position.The Regen
means “fast dum”.
5. Down & roll back
The boom can be lowered and the
bucket can scoop up by operating
the joystick lever to the front left
position (10 o’clock position).
However, However, the operation
time may not be shortened much
since the boom is lowered first and
then the bucket is rolled back due
to unbalanced hydraulic pressure in
the hydraulic circuit.
6. Down & dump
The boom can be lowered and the
bucket can dump by operating the
joystick lever to the front right posi-
tion (2 o’clock position). However,
these two operations may not be
performed simultaneously due to
unbalanced hydraulic pressure in
the hydraulic circuit.
7. Up & roll back
The boom can be lifted and the
bucket can scoop up by operating
the joystick lever to the rear left po-
sition (7 o’clock position). However,
these two operations may not be
performed simultaneously due to
unbalanced hydraulic pressure in
the hydraulic circuit.
8. Up & dump
The boom can be lifted and the
bucket can dump by operating the
joystick lever to the rear right posi-
tion (5 o’clock position). However,
the operation time is may not short-
ened much since the bucket dumps
first and then the boom is lifted due
to the unbalanced hydraulic pres-
sure in the hydraulic circuit.
9. Locking/unlocking joystick
Pressing the joystick lock lever in
locks the joystick while pulling it
outward unlocks the joystick as
shown in the figure.
WARNING
!!!!!
If moving the lever to the float-
ing position while the boom is
up in the air, the boom can fall
freely and lead to the accident.
3. Float
The floating function is activated
when the joystick lever is pushed
one position further from the down
position. When the lever is in this
position, the boom moves up and
down freely along the surface of the
ground as the hydraulic line is
opened from the valve to the boom
cylinder. This function is useful
when removing soft objects on hard
ground (for example, when remov-
ing snow or sand on an paved road
or removing night soil on the ground
in a stall).