Daedong KIOTI DK35SE, Manual

Page: 125 / 221

5
-16
DK35(CH)SE/DK40(CH)SE/DK45(C)HSE
T46O516A
3. Align pin holes, insert set pin and
secure them with the clip pin.
4. Fix the ROPS with the grip bolt.
(1) Grip Bolt (2) Set Pin
(3) Clip Pin
To avoid accidents:
Make sure that pins are properly
installed and secured.
!!!!!
CAUTION
1. This tractor is not equipped with a
separate parking brake. However
uses the brake pedals instead.
2. Make sure to interlock the left and
right brake pedals before applying
the parking brake.
3. Pull the parking brake lever (2) up
with the brake pedals depressed
fully to engage the pedals with the
latch. If the braking force is insu-
fficient, depress the pedals more
firmly.
4. Before leaving the tractor after park-
ing it, make sure to stop the PTO,
lower the implement onto the
ground, and stop the engine.
5. If it is necessary to leave the tractor
with the engine running, put all the
shift levers in the neutral position
and apply the parking brake firmly.
6. When parking the tractor on a slope,
stop the engine with the parking
brake applied and engage the low
speed gear. Also, put the shuttle
shift lever into the forward driving
position on an uphill and into the
reverse driving position on a
downhill.
H23O520A
(1) Chocks (2) Parking Brake Lever
PARKING