Daedong CK3520, Manual

Page: 28 / 236

1
-
1
ck3520 / ck4020 / ck4220
3. Before installing or using p.t.o
driven equipment, read the man-
ufacturer's manual and review the
safety labels attached to the equip-
ment.
wARNINg
before driving an implement
through the PTO, always make
sure that all bystanders are
well away from the tractor.
when using the PTO drive
with a stationary tractor, al-
ways make sure that the gears
are in neutral and that the
parking brake is applied.
before starting up any PTO-
driven implement hitched to
the three-point linkage, lift the
implement to its full height
and check that at least 1/4 of
the total length of the tele-
scopic section of the drive
shaft is engaged.
•
•
•
T66O122a
4. When operating stationary p.t.o
driven equipment, always apply
the tractor parking brake and place
chocks behind and in front of the
rear wheels. stay clear of all rotat-
ing parts.
5. do not attach a pto dirven imple-
ment if the implements safety
shields are damaged or not in
place. rotating shafts are an en-
tanglement hazard.
wARNINg
Ensure that implements and
attachments are properly in-
stalled and that the tractor and
implement PTO RPm ratings
match.
•
TC220-영문-유럽,호주향-OM-01.indd 16 2018-01-15 오후 1:29:42