Daedong CK3520, Manual

Page: 152 / 236

6
-
ck3520 / ck4020 / ck4220
1. place implement on the level
ground.
2. drive the tractor backward to move
as close as possible to an imple-
ment (approx. 5 cm). then, adjust
the height of the lower link to be
parallel to the pins of the imple-
ment.
3. place the shift levers in the neutral
position, stop the engine and apply
the parking brake.
(1) check link (2) turn Buckle
4. lengthen the chain by turning the
check link turn buckle.
5. first install the left lower link to the
implement pin, insert the lynch pin
into the hole, and turn the ring to
hold the implement pin securely.
6. install the right lower link to the
implement pin, insert the lynch pin
into the hole, and turn the ring to
hold the implement pin securely.
(1) turn Buckle (2) lift rod (rh)
(3) lower link (4) implement pin
(5) lynch pin
H61O601A H61O615A
REMOvAL AND INsTALLATION Of 3-POINT HITCH IMPLEMENT
(INCLuDINg CONNECTION Of uNIvERsAL jOINT)
(1) implement support (2) lower link
A40O613A
TC220-영문-유럽,호주향-OM-06.indd 2 2018-01-05 오후 5:56:19