Daedong CK3520 Manual Download

Page: 110 / 236

cK3520 / cK4020 / cK4220

heater and air conditioner

the air conditioner should be operated with the engine running.

(1) fan speed control dial (3) temperature control dial

(2) vent Mode control dial

(4) air conditioner switch

do not leave a child alone in the cabin. his/her health can be threat-

ened as internal temperature rises rapidly in hot weather or on a

sunny day.

•

warning

t21O431a

use the fresh air mode in nor-

mal conditions and use the

air recirculation mode only if

necessary. continued opera-

tion of the air recirculation

mode can cause the inside to

become stuffy, causing head-

aches, drowsiness, or frost on

the windows. do not operate

the recirculation mode for an

extended period of time.

•

warning

TC220-영문-유럽,호주향-OM-04.indd 44

2018-02-07 오전 10:39:41

Summary of Contents for CK3520













































































































































































































































Search results

Summary of Contents for CK3520

Reviews:

Related manuals for CK3520

Brands by name

Popular brands

Daedong CK3520, Manual

Search results

Summary of Contents for CK3520

Reviews:

Related manuals for CK3520

Brands by name

Popular brands