Daedong CK3520, Manual

Page: 127 / 236

5
5
-
5
HoW to drive
5. depress the clutch pedal. (the en-
gine will not start unless the clutch
pedal is depressed.)
depress the brake pedal. (HSt
model)
starting condition:
HsT: brake pedal depressed &
PTO switch off
mechanical : clutch pedal de-
pressed & PTO switch off &
sited on the seat (only for Eu-
rope models)
•
•
ImPORTANT
6. insert the key into the key cylinder,
turn it to the "on" position and wait
until the preheat indicator goes off
(approx. 8 seconds).
7. When the engine is started, release
the key. then, the key is automatically
turned back to the “on” position.
8. When the engine is started, Warm up
the engine for 3 to 4 minutes (10
minutes in winter) after releasing
the clutch pedal.
Never operate the start motor
for more than 10 consecu-
tive seconds as it consumes
an excess of battery power. If
the engine cannot be started
within 10 seconds, wait for 30
seconds and try again.
When trying to start the en-
gine again, wait until the fly-
wheel is completely stopped.
•
•
WARNING
(1) key Switch
(B) oFF (c) acc
(d) on (e) Start
tC2O404d
TC220-영문-유럽,호주향-OM-05.indd 5 2018-02-07 오후 1:09:44