Daedong CK3520, Manual

Page: 147 / 236

5
5
-
5
HoW to drive
(1) top link
2. the draft function is activated
when the top or middle hole on the
top link of the 3-point hitch is used.
the top hole is for sensitive draft
control.
3. to keep the plowing depth shal-
low, put the draft control lever to
the rear (Shallow) position. the
plowing depth tends to become
deeper naturally by outer condi-
tions. When the load increases by
tC2O462A
the increase of the plowing depth
while the draft control lever is set
to the “Shallow” position, the plow-
ing depth is maintained as shal-
low because the reaction force is
transferred to the internal system
via the top link and the lifting arm
is automatically lifted.
4. to keep the plowing depth deep,
put the draft control lever to the
front (deep) position.
5. the position of the draft control
lever should be different based
on the condition of soil to keep
the plowing depth constant. When
working on a new field, it is recom -
mended to put the draft control
lever to the proper position for the
desired plowing depth and lock the
lever with the lock bolt.
6. When using an implement which
requires no draft function, such as
a rotary tiller and mower, use the
bottom hole on the top link and put
the draft control lever in any posi-
tion.
CAUTION
If the lifting arm is properly
operated but abnormal noise
is still heard, the hydraulic
system may be malfunction-
ing. In this case, let the engine
idle for an 10 to 15 minutes
additionally and then try to
start the engine again. If the
problem is still present, con-
tact your local KIOTI Dealer.
•
7. However, if the draft control lever is
pushed forward to its end, the low-
est position of the lifting arm can be
lowered a little. on the other hand,
if the lever is pulled back to its end,
the highest position of the lifting
arm can be raised a little.
TC220-영문-유럽,호주향-OM-05.indd 25 2018-02-07 오후 1:09:50