Daedong CK3520, Manual

Page: 130 / 236

5
-
ck3520 / ck4020 / ck4220
HOW TO WARm UP ENGINE
1. Start the engine and run it at a low
speed and without a load for ap-
prox. 3 to 4 minutes.
2. in cold weather, increase the warm
up time to 10 minutes.
3. if it is very cold, warm up the en-
gine for approx. 15 minutes.
4. the engine throttle can be open to
50 % in order to shorten the warm-
ing up time.
5. The engine is sufficiently warmed
up when the temperature gauge on
the instrument panel indicates 1/4
of the normal temperature range,
regardless of the warming-up time.
6. do not increase the work load rap-
idly after starting work.
7. run the engine without load for
approx. 2 to 3 minutes before stop-
ping the engine after work.
(1) dead Battery (2) Jump cable
(3) Helper Battery
(a) ground (transmission case)
JUmP sTARTING
if the battery is discharged and the
engine cannot be started, it is possi-
ble to start the engine by connecting
the discharged battery to a battery
from another tractor or other extra
battery.
1. check that the rated voltage of the
discharged battery is same as the
voltage of the other tractor or ve-
hicle for jump start. (Specification
for this tractor: 12 v)
Warming up the engine ex-
cessively increases fuel con-
sumption and affects the dura-
bility of the tractor negatively.
Never warm up the engine and
leave the tractor for an extend-
ed period of time. It can cause
fire and an accident.
Never leave the tractor unat-
tended while warming up.
be sure to apply the parking
brake while warming up the
engine.
If the warm-up is skipped or
missed, the tractor can take
off abruptly to cause a fatal
accident.
•
•
•
•
•
WARNING
tc2o507a
TC220-영문-유럽,호주향-OM-05.indd 8 2018-02-07 오후 1:09:45