15
The lubricant doesn’t follow the product.
Attention
The non-use of the lubricant will result In
the loss of product warranty.
Terminal type
BORDEN
Channel To
Lubrication
(Entry of air)
Channel To
Lubrication
(Entry of air)
Terminal type
MIDWEST
fig. a
fig. b
control ring
Attention
Handpieces no submitted to process
of sterilization should be lubricated
at least twice a day.
Spray lubrication
To carry out the lubrication of your equipment, we recommend the use of the Lubs product.
Lubrication must be carried out by the posterior hole of Air motors as illustrated in fig. (a). Firmly
fit the oil applicator nozzle into the hole indicated in fig. (a) and apply the spray for 1 or 2 seconds
(fig. b) by holding the vial in vertical position.
Perform these operations (spray lubrication) with the regulating ring positioned clockwise and
counterclockwise.
Before of use, activate a handpiece during some seconds to eliminate the excess of oil. Cover the
piece with absorbent paper to remove the excess of oil.
EQUIPMENT REUSE
