background image

13

Precautions and warnings “after” the use of equipment

- Always maintain the equipment clean for the next operation.

- Do not modify any part of the equipment. Do not disconnect the cable or other connections 

without need.

- After using the equipment, clean and disinfect all the parts which may be in contact with the patient.

- If the equipment has any abnormality, check if the problem is related to any item listed in the topic

of unforeseen events (failures, causes and solutions). If it is not possible to resolve the problem, 

contact your representative (Alliage).

Precautions to be adopted against foreseeable or uncommon risks, related to

the deactivation and abandoning of equipment

In order to avoid environmental contamination or undue use of the Equipment after it has become

useless, it should be discarded in the suitable place (as per the local legislation of the country).

- Pay attention to the local legislation of the country for the conditions of installation and disposal

of residue.

- The use of pneumatic or electric tools to perform any type of recording on handpieces, could lead

to damage to the surface treatment of the product, causing the loss of warranty.

Manufacturer shall not be responsible for:

- Use of the equipment differing from that for which it is intended.

- Damages caused to the equipment, the professional and/or the patient by the incorrect installation

and erroneous procedures of maintenance, differing from those described in these Instructions for

use which come with the equipment or by the incorrect operation of it.

Precautions for the Reduction of the Environment Impact

Alliage S/A aims to achieve an environmental policy that encourages the environmentally conscious

supply  of  medical  products  that  continuously  minimize  environmental  impact  and  are  more 

environmentally friendly and human health friendly.

To keep a minimum impact on the environment, observe the following recommendations:

• After installation, forward the recyclable materials for the recycling process.

• During the life circle of the equipment, turn it off when it is not being used.

The biomedical waste comprises nonhigh material susceptible to cause disease or house pathogenic

organisms  that  must  be  stored  in  a  yellow  bag  properly  labeled  with  the  symbol  of  biological 

hazard, or stored in a container resistant to perforation, tight and even collection and incineration.

The packaging consists of cardboard, plastic and expanded polystyrene (EPS) which are

100% recyclable materials.

Dimensions:

Main unit: 0,170 X 0,071 X 0,030 / MASS: About: 0,155 Kg.

Precautions in case of alteration in the functioning of equipment

Warning 

Do not use the equipment in conditions unsuitable for use.

PRECAUTIONS, RESTRICTIONS AND WARNINGS

Summary of Contents for MICROMOTOR INTRA SL 30 TB SI





















Reviews: