D-Link xStack DES-3228PA Web/Installation Manual Download Page 62

Page: 62 / 274

DES-3228PA Embedded Web System User Guide

Page 59

Defining SNTP Authentication

The

SNTP Authentication Page

provides parameters for defining the means by which the SNTP server is authen-

ticated. To define SNTP authentication:

Click

System

SNTP

Authentication

. The

SNTP Authentication Page

opens:

Figure 23:

SNTP Authentication Page

The

SNTP Authentication Page

contains the following fields:

•

Enable SNTP Authentication

— Indicates if authenticating an SNTP session between the device and an

SNTP server is enabled on the device. The possible field values are:

–

Checked

— Authenticates SNTP sessions between the device and the SNTP server.

–

Unchecked

— Disables authenticating SNTP sessions between the device and the SNTP server.

•

Encryption Key ID

—

Indicates if the encryption key identification is used to authenticate the SNTP server

and device. The field value is up to 4294967295.

•

Authentication Key

—

Indicates the key used for authentication.

•

Trusted Key

—

Indicates the encryption key used (Unicast/Anycast) or elected (Broadcast) to authenticate

the SNTP server.

•

Remove —

Removes Encryption Key IDs. The possible field values are:

–

Checked —

Removes the selected Encryption Key ID(s).

–

Unchecked

—

Maintains the Encryption Key ID(s). This is the default value.

To enable SNTP Authentication, select

Enable SNTP Authentication

and click

. SNTP Authentica-

tion is defined, and the device is updated.

Summary of Contents for xStack DES-3228PA


















































































































































































































































































Search results

Summary of Contents for xStack DES-3228PA

Reviews:

D-Link xStack DES-3228PA, Web/Installation Manual, Page: 62 / 274

Search results

Summary of Contents for xStack DES-3228PA

Reviews: