D-Link xStack DES-3228PA Page 10 Web/Installation Manual Download

Page: 10 / 274

DES-3228PA Embedded Web System User Guide

Page 9

•

2 Copper 100BASE-T/1000BASE-T ports

— RJ-45 TX auto-sensing switching ports designated as ports

Ports 25 and 26, which are also Combo ports.

•

2 1000Base-T stacking ports

— Two RJ-45 stacking ports designated as ports Ports 27 and 28.

•

LED Indicators

— Port activity

Light Emitting Diodes

(LED) for each port and system LEDs that are dis-

played separately.

•

Reset

— A recessed reset button used for resetting the device.

Back Panel

The following figure illustrates the DES-3228PA back panel.

Figure 2:

DES-3228PA Back Panel

The DES-3228PA device back panel is configured as follows:

•

RPS Connector

—

Redundant Power Supply

(RPS) DC connector.

•

Power Connector

— AC power supply interface.

Ports Description

This section describes the device ports and includes the following topics:

•

10/100Base-T Fast Ethernet Ports

•

Combo Copper/SFP Port (100Base-FX/1000Base-X Fiber Ports)

•

1000Base-T Stacking Ports

•

RS-232 Console Port

10/100Base-T Fast Ethernet Ports

The device contains 10/100 Base-TX Fast Ethernet ports. The ports are an RJ-45 ports which support half- and
full-duplex mode 10/100Mbps.

Combo Copper/SFP Port (100Base-FX/1000Base-X Fiber Ports)

Small Form Factor Pluggable

(SFP) Optical Transceivers are integrated duplex data GBIC links for bi-directional

communication over multimode optical fiber, designed for high-speed Fiber Channel data links. The SFP port is
designated as 1000Base-X.

The SFP (GBIC) port can be removed and inserted as required. The following figure illustrates the GBIC insertion.

Summary of Contents for xStack DES-3228PA


















































































































































































































































































Search results

Summary of Contents for xStack DES-3228PA

Reviews:

Related manuals for xStack DES-3228PA

Brands by name

Popular brands

D-Link xStack DES-3228PA, Web/Installation Manual

Search results

Summary of Contents for xStack DES-3228PA

Reviews:

Related manuals for xStack DES-3228PA

Brands by name

Popular brands