manualshive.com logo in svg

D-Link xStack DES-3228PA, Web/Installation Manual, Page: 162 / 274

Share
Download
D-Link xStack DES-3228PA Web/Installation Manual Download Page 162

DES-3228PA Embedded Web System User Guide 

 Page 159 

Displaying and Editing PoE System Information

The 

PoE Interface Page

 displays system PoE information on the device, monitoring the current power usage, and 

enabling PoE traps. To display system PoE information on the device: 

1.

Click the 

System 

>

 Power over Ethernet > Interface 

tab. The 

PoE Interface Page

 opens:

Figure 98: PoE Interface Page

The 

PoE Interface Page 

contains the following fields: 

•

Admin Status 

— Indicates the device PoE mode. The possible field values are: 

–

Auto

 — Enables the Device Discovery protocol, and provides power to the device using the PoE module. 

The Device Discovery Protocol enables the device to discover Powered Devices attached to the device 
interfaces, and to learn their classification. This is the default settings.

–

Never

 — Disables the 

Device Discovery

 protocol, and stops the power supply to the device using the 

PoE module.

•

Operation Status

 — Indicates if the port is enabled to work on PoE. The possible field values are: 

–

On

 — Indicates the device is delivering power to the interface.

–

Off

 — Indicates the device is not delivering power to the interface.

–

Test Fail

 —Indicates the powered device test has failed. For example, a port could not be enabled and 

cannot be used to deliver power to the powered device. 

–

Testing

 — Indicates the powered device is being tested. For example, a powered device is tested to 

confirm it is receiving power from the power supply. 

–

Searching 

— Indicates that the device is currently searching for a powered device. Searching is the 

default PoE operational status. 

–

Fault

 — Indicates that the device has detected a fault on the powered device. For example, the powered 

device memory could not be read.

•

Priority Level

 — Determines the port priority if the power supply is low. The port power priority is used if the 

power supply is low. The field default is low. For example, if the power supply is running at 99% usage, and 
port 1 is prioritized as high, but port 3 is prioritized as low, port 1 is prioritized to receive power, and port 3 may 
be denied power. The possible field values are: 

Summary of Contents for xStack DES-3228PA



















































































































































































































































































Reviews:

No comments