manualshive.com logo in svg

D-Link xStack DES-3228PA, Web/Installation Manual, Page: 202 / 274

Share
Download
D-Link xStack DES-3228PA Web/Installation Manual Download Page 202

DES-3228PA Embedded Web System User Guide 

 Page 199 

Section 19. Managing System Logs

This section provides information for managing system logs. The system logs enable viewing device events in real 
time, and recording the events for later usage. System Logs record and manage events and report errors and 
informational messages.

Event messages have a unique format, as per the Syslog protocols recommended message format for all error 
reporting. For example, Syslog and local device reporting messages are assigned a severity code, and include a 
message mnemonic, which identifies the source application generating the message. It allows messages to be fil-
tered based on their urgency or relevancy. Each message severity determines the set of event logging devices 
that are sent per each event message.

The following table lists the log severity levels:

This section includes the following topics:

•

Enabling System Logs

•

Viewing the Device Memory Logs

•

Viewing the FLASH LogsDefining Servers Log Parameters

Table 11:

System Log Severity Levels

S e v e r i t y

L e v e l

M e s s a g e

Emergency

Highest (0)

The system is not functioning.

Alert

1

The system needs immediate attention.

Critical

2

The system is in a critical state.

Error

3

A system error has occurred.

Warning

4

A system warning has occurred.

Notice

5

The system is functioning properly, but a sys-
tem notice has occurred.

Informational

6

Provides device information.

Debug

7

Provides detailed information about the log. If a 
Debug error occurs, contact Customer Tech 
Support.

Summary of Contents for xStack DES-3228PA



















































































































































































































































































Reviews:

No comments