manualshive.com logo in svg

D-Link xStack DES-3228PA, Web/Installation Manual, Page: 224 / 274

Share
Download
D-Link xStack DES-3228PA Web/Installation Manual Download Page 224

DES-3228PA Embedded Web System User Guide 

 Page 221 

Viewing the RMON History Table

The 

RMON History Table Page 

contains interface specific statistical network samplings. Each table entry repre-

sents all counter values compiled during a single sample. To view the RMON History Table: 

1.

Click Advanced Setup 

> RMON > History > History Table

. The 

RMON History Table Page

 opens.

Figure 146:RMON History Table Page

The 

RMON History Table Page

 contains the following fields:

•

History Entry No.

 — Displays the entry number for the History Control Table page.

•

Owner

 — Displays the RMON station or user that requested the RMON information. The field range is 0-20 

characters.

•

Sample No.

— Indicates the sample number from which the statistics were taken.

•

Drop Events 

— Displays the number of dropped events that have occurred on the interface since the device 

was last refreshed.

•

Received Bytes (Octets) 

— Displays the number of octets received on the interface since the device was 

last refreshed. This number includes bad packets and FCS octets, but excludes framing bits.

•

Received Packets

 — Displays the number of packets received on the interface since the device was last 

refreshed, including bad packets, Multicast and Broadcast packets.

•

Broadcast Packets 

— Displays the number of good Broadcast packets received on the interface since the 

device was last refreshed. This number does not include Multicast packets. 

•

Multicast Packets 

— Displays the number of good Multicast packets received on the interface since the 

device was last refreshed.

•

CRC Align Errors

 — Displays the number of CRC and Align errors that have occurred on the interface since 

the device was last refreshed.

•

Undersize Packets

 — Displays the number of undersized packets (less than 64 octets) received on the 

interface since the device was last refreshed.

•

Oversize Packets

 — Displays the number of oversized packets (over 1518 octets) received on the interface 

since the device was last refreshed.

Summary of Contents for xStack DES-3228PA



















































































































































































































































































Reviews:

No comments