63
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Configuration
DHCP IP Address
Range:
Enter the starting and ending IP addresses for the DHCP server’s IP
assignment.
Note:
If you have reserved static IP addresses for client devices, make sure
the IP addresses are outside of this range or you might have an IP conflict.
DHCP Lease
Time:
Enter the length of time for the IP address lease in minutes. The default
is 10,800 minutes.
Always
Broadcast:
Enable this feature to broadcast your network's DHCP server to LAN/
WLAN clients.
WAN Port Speed:
You may set the port speed of the Internet port to
10 Mbps
,
100 Mbps
,
1000 Mbps
, or
Auto
(recommended).
UPnP:
Enable or disable Universal Plug and Play (UPnP). UPnP provides
compatibility with networking equipment, software, and peripherals.
This is enabled by default.
IPv4 Multicast
Streams:
Enable to allow IPv4 multicast traffic to pass through the router from
the Internet. This is enabled by default.
IPv6 Multicast
Streams:
Enable to allow IPv6 multicast traffic to pass through the router from
the Internet. This is enabled by default.
Network
DHCP Server
Advanced Settings...
