35
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Configuration
IPV4 - PPTP
Choose Point-to-Point-Tunneling Protocol (
PPTP
) if your ISP uses a PPTP connection. Your ISP will provide you with a
username and password. Click
Save
at any time to save the changes you have made on this page.
PPTP Server:
Enter the PPTP server's IP address provided by your ISP.
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Reconnect Mode:
Select either
Always on
,
On Demand
, or
Manual
.
Maximum Idle
Time:
Configurable when
On Demand
is selected. Enter a maximum
idle time for the Internet connection to be maintained
during inactivity. To disable this feature, select
Always on
or
Manual
as the reconnect mode.
Advanced Settings...
Address Mode:
Select
Static IP
if your ISP assigned you an IP address, subnet mask,
gateway, and DNS server addresses. In most cases, however, select
Dynamic IP
.
If you select
Dynamic IP
as the Address Mode:
Primary DNS
Server:
Enter the primary DNS server's IP address assigned by your ISP. This
address is usually automatically obtained from your ISP.
Secondary DNS
Server:
Enter the secondary DNS server's IP address assigned by your ISP. This
address is usually automatically obtained from your ISP.
MTU:
Maximum Transmission Unit (1280~1460) - The default MTU is 1400.
You may need to change the MTU for optimal performance with your
ISP.
