78
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Configuration
Static Routes - IPv4
The Static Routes section allows you to define custom routes to control how
traffic moves around your network.
In the
Features
tab on the left side of the page, click
Static Routes
. To
configure IPv6 routes, click
IPv6
and refer to
. To return to the main
IPv4 static routes
page, click
IPv4
.
To remove a rule, click on the trash can icon in the Delete column. To edit a
rule, click on the pencil icon in the Edit column. To create a new route, click the
Add Route
button. Click
Save
when you are done. If you edit or create a route,
the following options will appear:
Name:
Enter a name for the route.
Destination
Network:
Enter the destination IP address of this route.
Mask:
Enter the subnet mask of the route.
Gateway:
Enter your next hop gateway to be taken if this route is in use.
Metric:
The route metric is a value from 1 to 16 that indicates the cost of
using this route. A value of 1 represents the lowest cost and 16 the
highest cost.
Interface:
Select an interface that the IP packet must use to transit out of the
router when this route is in use.
Click
Apply
when you are done.
