62
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Configuration
Network
This section allows you to change the local network settings of the router and configure the DHCP settings. In the Settings
menu on the left side of the page, click
Network
. Click
Save
at any time to save the changes you have made on this page.
LAN IP Address:
Enter the IP address of the router. The default IP address is
192.168.200.1
.
If you change the IP address, you will need to enter the new IP address
in your browser to get back into the configuration utility.
Subnet Mask:
Enter the subnet mask of the router. The default subnet mask is
255.255.255.0
.
Management
Link:
The default address to access the router’s configuration is
http://M30-xxxx.local/
(where xxxx represents the last 4 digits of your
router's MAC address). You can replace
M30-xxxx
with a name of your
choice.
Local Domain
Name:
Enter the domain name (optional).
Enable DNS
Relay:
Disable to transfer the DNS server information from your ISP to your
computers. If enabled, your computers will use the router's setting for
a DNS server.
Status:
Enable or disable the DHCP server.
Network Settings
