D-Link EasySmart DGS-1100-24 Manual Download Page 34

Page: 34 / 40

D-Link EasySmart Switch User Manual

Figure 55 – QoS > Bandwidth Control

From Port / To Port:

A consecutive group of ports may be configured starting with the selected port.

Type:

This drop-down menu allows you to select between

(receive),

(transmit), and

Both

. This

setting will determine whether the bandwidth ceiling is applied to receiving, transmitting, or both

receiving and transmitting packets.

No Limit:

This drop-down menu allows you to specify that the selected port will have no bandwidth limit.

Enabled

disables the limit.

Rate:

This drop-down menu allows you to select data rate from 64Kbps to 512Mbps.

Click

Apply

to set the bandwidth control for the selected ports.

Security > MAC Address Table > Static MAC

This feature provides two distinct functions. The

Disable Auto Learning Excluding Uplink Port

table allows

turning off the function of learning MAC address automatically, if a port isn't specified as an uplink port (for
example, connects to a DHCP Server or Gateway). By default, this feature is Off (disabled).

Summary of Contents for EasySmart DGS-1100-24









































Search results

Summary of Contents for EasySmart DGS-1100-24

Reviews:

Related manuals for EasySmart DGS-1100-24

Brands by name

Popular brands

D-Link EasySmart DGS-1100-24, Manual

Search results

Summary of Contents for EasySmart DGS-1100-24

Reviews:

Related manuals for EasySmart DGS-1100-24

Brands by name

Popular brands